Small spray dryerThe laboratory is still dry research leader, but our company according to the quality and precision of small spray dryer domestic production shortfalls in the system upgrade, so as to get a better effect and effect.
●SIEMENS color large touch screen operation, SIEMENSPLCThe program is programmed with automatic control and manual control. The panel is set in both Chinese and English, and the experimental parameters are set automatically
●The control switch employs the Schneider brand.
●Real-time regulationPIDConstant temperature control technology, accurate temperature control, heating and temperature control accuracy±1℃.
●Spray, drying and collecting devices are made of transparent, high quality, high temperature resistant borosilicate glass,The whole spray drying process is visible.
●Two atomization structure of fluid spraying, high precisionThree hundred and sixteenStainless steel materials, the size of powder injection is normal distribution, good liquidity.
●The anti blocking needle is adjustable in frequency and will be removed automatically when the nozzle is blocked so as to ensure the continuity of the experiment.
●The feed quantity can be adjusted by feeding peristaltic pump.
●Special protection function, the fan does not start, the heater can not start, the air compressor does not start, the peristaltic pump can not start (in order to avoid the wrong operation, resulting in experimental problems, or equipment problems).
●Built in imported oil-free air compressor, noise less than50db.
●Equipped with air inlet filter to make sure the sample is pure.
●After drying products, uniform particle size,95%Above dry powder in the same particle size
●Later stage can be upgraded with low temperature spray drying and organic solvent spray drying.
Small spray dryerDevice parameter:
OneWater evaporation:1500 - 2000
2、Minimum feed rate:50ml
ThreeLiquid delivery pump:FourRotor pump (feed pipe):Imported silica gel peristaltic tube
4、Atomization: two fluid atomizing nozzle
FiveNozzle caliber: Optional07/1.0/1.5/2.0/2.2mmStandard configuration1.0mm
SixAverage drying time:One～1.5s
SevenTemperature setting range:30-300℃PIDAutomatic control; (temperature can be set)
EightTemperature regulation accuracy: inlet temperature±1℃
9、Fan: single phase low noise fan, fan flow:95m³/minWind pressure:1.1kpa
TenTemperature sensor:pt - 100Thermocouple
11、Range of spray regulation:0-0.8 MPa(suggest0.2 MPa）
12、Spray pressure intake:106L/minExhaust capacity:36L/minInput power580w
ThirteenSpray air compressor: Taiwan imported dolphin brand oil-free air compressor
FourteenCeramic electric heater power3.5kw
15、Rated voltage:220v / all rolling stock required to operate on
16、Air inlet: fiber cotton filter
SeventeenLiquid delivery pump flow range adjustment:0-26ml/min
EighteenElectric box heat dissipation: BrushlessDCMotor fan fan hot
NineteenSpray air connection caliber: outside diameter6mmtrachea
TwentyOverall dimensions:550 (w) x650 (d) x1300 (h) mm
21、Equipment control mode: touch screen control adopts SIEMENS brand
22、Control procedure: AdoptionPLCSIEMENS brand
23、Main electric box: SIEMENS and Schneider brand
24、Machine material/Weight:304 / 110
Website: http: //www.aomprod.com
Address: No. 298, Zhanfa Road, Fengxian District, Shanghai