lab spray dryermain features;
●Original nozzle (double fluid nozzle), high efficiency.
●colourLCDTouch screen parameter display: air inlet temperature/Outlet temperature/Peristaltic pump speed/Air volume/Needle frequency.
●Fully automatic control: one button boot, set the spray process parameters, the temperature reached a predetermined temperature, peristaltic pump settings, touch screen display running process, running process clear display.
●Manual control: if you need to adjust the process parameters during the experiment, you can switch to manual state easily. The whole process of experiment is displayed by color touch screen
●With a nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically removed, the frequency of the needle can be adjusted automatically.
●Shutdown protection function: when the power off, just press the stop button, the machine fan out immediately stop running, ensure that the device will not because of misoperation (forced turn off fan) and heating part burned.
●The entire system is made of stainless steel, allowing the drying process to proceed in a non polluting environment.
●The imported oil free air compressor has a normal distribution of particle size, very good flowability and very low noise60db.
●Imported two fluid spray structure, the machine is made of high quality stainless steel, compact design, no need for ancillary equipment.
●The design of drying temperature control adopts real-time regulationPIDConstant temperature control technology, accurate temperature control, heating and temperature control accuracy±1℃.
●To maintain the purity of the sample, an inlet filter is provided.
●The feed quantity can be adjusted by feeding peristaltic pump, and the minimum sample quantity can reach50ml.
●Dry powder after drying, its particle size is even,95%Above dry powder in the same particle size range.
●For viscous materials, a nozzle cleaner (needle) will be automatically removed when the nozzle is blocked, and the frequency of the needle can be adjusted automatically.
●The tower wall air hammer device innovation to prevent accumulation of the materials, the material recovery rate is higher.
lab spray dryerTechnical parameter:
◆Intake air temperature control:30 ℃～300℃
◆Air temperature control:30 ℃～140℃
◆Evaporation water:3000ml / h～5000ml / h
◆Maximum feed quantity: Max5000ml / h(adjustable)
◆Feed mode: peristaltic pump regulation
◆Minimum feed rate:200mL
◆Temperature control precision:±1℃
◆Average drying time:One～1.5s
◆Overall power:15KW /380V
lab spray dryerApplication field:
Food and pharmaceutical products: milk powder, egg yolk, soy sauce, coffee, starch, protein, hormones, serum, antibiotics, enzymes, spices and so on
Extractive organic chemistry: waxes, dyes, detergents, surfactants, pesticides, preservatives, synthetic resins, pigments, etc.
Inorganic chemistry: ferrite, ceramic, copy powder, magnetic material, metal powder, photosensitive material, various industrial drugs, sample waste liquid and so on.
Website: http: //www.aomprod.com
Address: No. 298, Zhanfa Road, Fengxian District, Shanghai